QUIKPAGER Wireless™

Self-contained, on-site Wireless Paging System used to send messages to alphanumeric, numeric or tone/vibrate pagers. QUIKPAGER Wireless can be supplied with a synthesized UHF or VHF transmitter of 5, 25, 50 or 100 Watts. QUIKPAGER Wireless has voice prompts to page from any touch-tone telephone, internal modem and an RS-232 port to page messages from Nurse Call systems, PageAlert, the 4-Line Voice Prompt unit, QUIKSERVER, and from many other devices using TAP protocol.

Especially designed to work with QUIKPAGER Wireless or DigiPager Wireless, to page messages from any LAN workstation to on-site or off-site personnel with numeric or alphanumeric pagers. Compatible with Windows 95, Windows 98 and Windows NT.

Stand-alone paging unit used to send direct, private messages from the office to people with alphanumeric pagers and PCS text phones. QUIKPAGER 2400 uses the business telephone line to connect with the service provider to quickly send messages.

The same features as QUIKPAGER 2400 with the addition of Alert Paging capabilities using PageAlert. Use QUIKPAGER Alert to page individuals or groups of people assigned to each PageAlert monitor port.

Avoid busy signals when calling QUIKPAGER Wireless to page from a telephone. The 4-LVU uses independent voice prompts to simultaneously answer calls from 4 telephone lines. The TAP RS-232 output can be connected directly to QUIKPAGER Wireless or through QUIKSERVER in a multiple configuration.

QUIKSERVER™

QUIKSERVER routes TAP messages from up to (3) independent TAP sources such as Nurse Call systems, Monitor and Alarm systems, other QUIKPAGERs or PCs, etc. The TAP output can connect to QUIKPAGER Wireless or DigiPager Wireless. QUIKSERVER has an internal battery to retain messages in transit in case of power failure.

PageAlert™

PageAlert notifies any change of status of 16 "dry-contact" ports. By programming QUIKPAGER Wireless or DigiPager Wireless, you can assign each port to page one person or a group of people. Each port can be programmed with a canned message. You can program each port to page on contact close, contact open or both. PageAlert is ideal for monitoring status of alarm systems in buildings, machinery, temperature, humidity, smoke, doors and numerous industrial and commercial applications. PageAlert connects to QUIKPAGER Wireless or DigiPager Wireless using an RS-232 cable of up to 500 ft. in length.

Increase power 5, 25, 50, 100 Watts. Simply connect the RF output of QUIKPAGER Wireless or DigiPager Wireless to the input of the Power Amplifier. We will calibrate the transmitting power based on your requirements.