| System Modules
The following modules
can be connected to QUIKPAGER Wireless™ to expand the
operational features of the system.
QUIKPAGER™ 2400
Use
QUIKPAGER™ 2400 for additional points of entry.
4-LVU
Use the 4-Line Voice Prompt Unit (4-LVU)
to avoid busy signals when calling QUIKPAGER Wireless to page
from a telephone. The 4-LVU uses independent voice prompts
to simultaneously answer calls from 4 telephone lines.
QUIKSERVER™ Unit
QUIKSERVER™
is a TAP concentrator module used to route messages to QUIKPAGER
Wireless from up to (3) independent TAP sources such as Nurse
Call systems, Monitor and Alarm systems, QUIKPAGER 2400, etc.
The TAP output connects to QUIKPAGER Wireless. QUIKSERVER
has an internal battery to retain messages in transit in case
of power failure.
PageAlert™
Use PageAlert to notify any
change of status of 16 dry-contact or DC voltage ports. By programming QUIKPAGER
Wireless™ you can assign each port to page one person
or a group of people. Each port can be programmed with a canned
message. You can program each port to page on contact closure,
contact open or both. When paging on contact closure or contact
open only, you can program per port, a delay to page and a
number of repeats until the port returns to its original status.
PageAlert™ is ideal for monitoring status of alarm systems
in buildings, machinery, temperature, humidity, smoke, doors
and numerous industrial and commercial applications. PageAlert
connects to QUIKPAGER Wireless™ using an RS-232 cable
of up to 500 ft. in length.
PageAlert Extender™
Each PageAlert Extender™
provides an additional 16 monitoring ports to the system.
You can use up to (5) PageAlert Extenders with PageAlert to
monitor up to (96) ports.
|
