QUIKPAGER Wireless on-site paging system

Link Sites, Simulcast Messages to different Site

QUIKPAGER Wireless™ is a self-contained, on-site paging system used to send messages to alphanumeric, numeric or tone/vibrate pagers.

Model	QPW-5000-5W
Transmitter	5w External
Frequency	Synthesized
Band	VHF: 136 MHz - 162 MHz 148 MHz - 174 MHz UHF: 440 MHz - 470 MHz 400 MHz - 430 MHz
Approx. Coverage	1.5 to 2 miles

On-site Paging System Features

Power amplifiers of 25, 35, 50, 100 Watts are available.
Compatible with industry standard VHF/UHF band pagers.
Supports POCSAG alphanumeric, numeric and tone/vibration messaging.
RF data rates of 512, 1200 and 2400 baud, programmable with auto-switching.
Instant transmission within a radius of 1 to 30 miles, depending on selected power and upon terrain conditions.
Use any touch-tone telephone to page people by responding to voice prompts.
Receive TAP messages from Nurse Call, Alarm and Monitoring Systems for instant paging.
Page messages received from QUIKPAGER™ 2400 units or QUIKPAGER™ NetWorks software installed within the building.
Receive TAP messages via the telephone line from remote QUIKPAGER™ 2400 or PCs with paging software.
Send alphanumeric messages to subscribers of paging or PCS text phones companies for Regional or Nationwide coverage.
Use PageAlert to notify alarm status of up to 96 dry contacts.
Use QUIKSERVER™ to page messages from multiple sources.
Link sites with QUIKPAGER Wireless™ for Repeater operations or Multicasting.

QUIKPAGER Wireless Product Features

Professional, heavy-duty keyboard to input messages with 6 programmable canned messages.
Program Short Pager ID database to page up to 5,000 pagers by typing on the keyboard.
Page by using voice prompts. Caller will hear true transmission confirmation.
Name Directory for 200 names to help selecting individuals by name. (500 Name Directory model available).
Multitasking allows continuous typing of messages during voice input and transmission of messages.
Program up to 31 wide-area paging companies to deliver messages using internal modem and telephone line.
Create up to 32 Groups using the Directory of Names, for paging the same message.
Transfer programming from a QUIKPAGER Wireless™ to another in a few minutes using the telephone line.
Internal memory stores up to 300 sent messages for quick viewing, re-sending or printing.
Program on-line printing to print messages as they are sent.
Program up to 16 User Logbooks to store and print messages at the end of the day, in alphabetical and chronological order.

System Modules

The following modules can be connected to QUIKPAGER Wireless™ to expand the operational features of the system.

QUIKPAGER™ 2400

Use QUIKPAGER™ 2400 for additional points of entry.

4-LVU and 2-LVU

Use the 4-Line Voice Prompt Unit (4-LVU) to avoid busy signals when calling QUIKPAGER Wireless to page from a telephone. The 4-LVU uses independent voice prompts to simultaneously answer calls from 4 telephone lines. The
(2-LVU) answers calls from 2 telephone lines. The TAP RS-232 output can be connected directly to QUIKPAGER Wireless or through QUIKSERVER in a multiple configuration.

QUIKSERVER™ Unit

QUIKSERVER™ is a TAP concentrator module used to route messages to QUIKPAGER Wireless from up to (3) independent TAP sources such as Nurse Call systems, Monitor and Alarm systems, QUIKPAGER 2400, etc. The TAP output connects to QUIKPAGER Wireless. QUIKSERVER has an internal battery to retain messages in transit in case of power failure.

PageAlert™

Use PageAlert to notify any change of status of 16 dry-contact ports. By programming QUIKPAGER Wireless™ you can assign each port to page one person or a group of people. Each port can be programmed with a canned message. You can program each port to page on contact closure, contact open or both. When paging on contact closure or contact open only, you can program per port, a delay to page and a number of repeats until the port returns to its original status. PageAlert™ is ideal for monitoring status of alarm systems in buildings, machinery, temperature, humidity, smoke, doors and numerous industrial and commercial applications. PageAlert connects to QUIKPAGER Wireless™ using an RS-232 cable of up to 500 ft. in length.

PageAlert Extender™

Each PageAlert Extender™ provides an additional 16 monitoring ports to the system. You can use up to (5) PageAlert Extenders with PageAlert to monitor up to (96) ports.